cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
411
Views
0
Helpful
1
Replies

Interface errors

gkurunthasalam
Level 1
Level 1

Hi Team,

I am having a switch with more than 40+ ports. i want to identify the interface errors and potential bad ports in that switch. Do we have any command to chekc all the port errors at a stretch or please advise the suitable commands to check this requirement.

regards

Gokul

1 Accepted Solution

Accepted Solutions

zdesignstudio
Level 4
Level 4

Depending on IOS version this may be a little different. The below is from 12.2.

show interfaces counters errors

Please rate useful posts and mark answers as correct if applicable.

Please rate useful posts and mark answers as correct if applicable.

View solution in original post

1 Reply 1

zdesignstudio
Level 4
Level 4

Depending on IOS version this may be a little different. The below is from 12.2.

show interfaces counters errors

Please rate useful posts and mark answers as correct if applicable.

Please rate useful posts and mark answers as correct if applicable.