05-23-2013 12:53 AM - edited 03-07-2019 01:30 PM
Dear All
I have a query regarding attached Network Design
PC---2960---3750(One Routed Port and All Switched Port)------------------------ 3750(One Routed Port and All Switched Port)-----2960------Internet
I have many Vlans on left side of image , Right Side of Image is having internet connection via Modem, and local connectivity between VLAN works fine but Other Vlans Except Vlan1 is able to Access Internet..
Note that 3750X did not have NAT Feature ,How should I able to get Internet on Other Vlans (10,20)
Please Reply
05-23-2013 01:11 AM
Hello
Seem like the linksys router is already performing NAT - Do devices vlan 10/20 have reachability this router?
res
Paul
Please don't forget to rate any posts that have been helpful.
Thanks.
05-23-2013 01:53 AM
Dear
I have redistribute connected route to EIGRP but VLAN 10,20 did not have reachability to Linksys device.
05-23-2013 02:08 AM
Hi,
you should add static routes for vlan 10 and 20 on the wrt300N pointing towards the MLS 1
Regards
Alain
Don't forget to rate helpful posts.
05-23-2013 03:10 AM
Hi
Thanks for support.I have another Modem in place of wrt300n and did not have any static route option in it and MLS1 is 3750x and did not have any NAT Option.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide