Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Ask Me Anything Event   Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from  Monday, November 4, 2024 through Friday, November 15, 2024. Our colleagues Rohit Chopra, Vaibhav Aggarwal, Anuraag Majumdar, Saquib Zeya...

rohit.png Vaibhav Aggarwal.png anuu.png Saquib Zeya.png

I'm fairly new to cisco products am in the process of developing my network knowledge on a deeper level.  I have a 3825 with a HWIC-4ESW and I'm struggling to fully understand how the two "see" each other.  I've setup a VLAN with a layer 3 address on...

Hello ExpertsIs there a way I can change the VLAN Id on every packet that traverses a specific interface on a router, so it is different from original VLAN Id. Example, A PC connects to VLAN 10 on a switch, and when it traverses a router port it is t...

Hi all,I receive a question from a future customer about this future if its supported on " WS-C2960S-24PS-L":configuring 2 dhcp server on this swith ( 1 dhcp for voice vlan , and 1 for Data Vlan).I did some search , but i didnt find the answer .Pleas...

habouzyad by Level 1
  • 1411 Views
  • 2 replies
  • 0 Helpful votes

I have two servers connected to Nexus, these servers are sever with windowns 2008 failover cluster. ativivo / standby.I want the standby server 1 and server 2 becomes active it appears I can not duplicate ip, and I'm sure there is not ip duplicate.An...

Hi experts,  I need some help with configuring a network.  Network diagram is attached.  I created 3 VLANs on the 3550 Switch and enabled InterVLAN Routing.  I am able to ping from one VLAN to another.  I added Static Routes for the VLAN networks on ...

My company has around 89,000 to spend on our network. I would say our network is small to medium in size. About 150-200 users at any given time. I recently bought new equipment with a different quote so think I'm ok hardware wise. What would anyone s...

Dear AllI'm working on the design of an IP integrated solution which shall combineIP CCTVIP TVIP VIDEO INTERCOMIP TELEPHONYIP WIRELESS ACCESS POITSData outleetas mentioned in the attached tablei'm thinking about having access switch at each building ...

I am trying to upgrade Sup2T from 15.0 to 15.1 (same feature sets).  I have the new  image in bootflash and have changed the boot system statement to boot from the new image and the config register is 0x2102.  However, everytime it reboots it loads t...

kfee by Level 1
  • 1969 Views
  • 4 replies
  • 0 Helpful votes

Hi,I was working on adding a Cisco 6513 to TACACS but ran into trouble.  While I work on the issue offline (recreate and test another switch), I wanted to place this switch on radius temporarily.For some reason i cant undo/delete the AAA commands in ...

Hi Everyone,I'd like to know please if someone can check this drawing and point out what might be wrong with it... im assuming theres more than 1 thing wrong of course here as i'm only starting out learning networking , but would like to learn where ...

paulmon07 by Level 1
  • 1385 Views
  • 7 replies
  • 0 Helpful votes