- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-13-2021 08:47 AM - edited 05-13-2021 08:49 AM
Hi All,
Apologies if I have the wrong thread. I have been set a university assignment which involves me building a network for a hypothetical college using Packet Tracer. As part of the assignment, I need to create three areas (rooms), these are:
1. LAB-1
2. LAB-2
3. Staff Room
I have created four zones, LAB-1, LAB-2, Staff room and a central zone which holds a hypothetical AD server. In LAB-1/LAB-2 there are 4 student computers on VLAN 3, 1 staff computer on VLAN 2 and a printer on VLAN 4. Firstly, I want the student and staff computers to be able to ping the printer (in their respective labs) but preferably not each other. Secondly all the computers both on the labs and in the staff room need to ping the AD server. Each zone has a switch and in the middle of this is a router; my technical professor suggested to use a multilayer switch although I think it might be easier to use a router.
Does anyone have ideas or tips on how to solve this issue? I have attached the Packet Tracer file.
Kind Regards,
Jason
Solved! Go to Solution.
- Labels:
-
Other Switching
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-13-2021 11:50 AM - edited 05-13-2021 02:02 PM
@confusedstudent77 wrote:
Firstly, I want the student and staff computers to be able to ping the printer (in their respective labs) but preferably not each other. - this can be accomplished with routed & vlan access-lists however PT doesnt support VACLs so you should be able to protect each port indiividually instead, it isnt a recommended way but it does work.
Secondly all the computers both on the labs and in the staff room need to ping the AD server. Each zone has a switch and in the middle of this is a router; - this can be accomplished with either a L3 switch or router providing the L3 inter-vlan routing
Please review the attached working PT file
Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.
Kind Regards
Paul
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-13-2021 11:50 AM - edited 05-13-2021 02:02 PM
@confusedstudent77 wrote:
Firstly, I want the student and staff computers to be able to ping the printer (in their respective labs) but preferably not each other. - this can be accomplished with routed & vlan access-lists however PT doesnt support VACLs so you should be able to protect each port indiividually instead, it isnt a recommended way but it does work.
Secondly all the computers both on the labs and in the staff room need to ping the AD server. Each zone has a switch and in the middle of this is a router; - this can be accomplished with either a L3 switch or router providing the L3 inter-vlan routing
Please review the attached working PT file
Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.
Kind Regards
Paul
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-13-2021 01:47 PM
Hi Paul,
Thanks for the advice, what did you think of my Packet Tracer file? Any thoughts?
Thanks,
Jason
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-13-2021 02:01 PM
Hello
chexk the working PT file I attached and review its configuration
Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.
Kind Regards
Paul
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-14-2021 02:19 AM
Hi Paul,
Thanks for sending this through, I have seen that you have changed some of the ip addresses and how LAB-2 switch is used, do you mind explaining what was wrong with my network and how exactly rectified it?
Kind Regards,
Jason
