12-19-2021 07:15 PM
Hi I'm Kim student from South Korea.
An error occurs during initialization and booting of the switch.
The switch is ws-c2960x-48ts-l, and I think all the ios are missing during initialization.
I tried to download and install the image file on usb, but the following problems occurred.
switch: boot usbflash0:c2960x-universalk9-mz.152-2.E7.bin
Loading "usbflash0:c2960x-universalk9-mz.152-2.E7.bin"...usbflash0:c2960x-universalk9-mz.152-2.E7.bin: bad file number
Error loading "usbflash0:c2960x-universalk9-mz.152-2.E7.bin"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch:
Even though I didn't get the file name wrong, I couldn't solve it. Do you know what the problem is?
Thank you
Solved! Go to Solution.
12-19-2021 07:44 PM
IOS file is corrupt.
12-19-2021 09:30 PM
Hi,
download IOS from official site again and match the checksum before use. this message says, file is not able to load
12-19-2021 07:44 PM
IOS file is corrupt.
12-20-2021 05:36 AM
thanx for advice
I replaced IOS file and it worked !
12-19-2021 09:30 PM
Hi,
download IOS from official site again and match the checksum before use. this message says, file is not able to load
12-19-2021 10:46 PM
Is this really a 2960X?
06-26-2023 09:00 AM
how do you check the checksum and how do you match it?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: