10-01-2013 12:30 AM - edited 03-07-2019 03:46 PM
Dears
please which of this two IOS Image is better to upgrade to my C3750 ?
???????????????????
10-01-2013 01:59 AM
Which of one is better ? whats the differences please ?............ Help me to give you Best rate
It seems that all of my honest reponses have been un-appreciated as reflected in your "1" star rating.
All of my reponses to this thread are therefore REMOVED.
10-01-2013 03:43 AM
No please mr Leo , please 4give . really Apreciated ur help ..................
Please help my circumstance and i need your help !!!!!!
10-01-2013 05:02 AM
c3750-ipserviceslmk9-tar.122-55.SE8.tar
Use this IOS if your 3750 only has 16 mb of flash. If you have stack of switch and at least one of them has 16 mb flash, then use this file.
c3750-ipservicesk9-mz 122-55 SE8
Only use this file if your 3750G has 32 mb flash.
10-01-2013 05:43 AM
MR Leo Thank you very Much ......
but someone told me that need to upgrade the IOS to 15.0(1)SE , if i want to configure Flexible Netflow .....
10-01-2013 08:27 AM
Search for 'Flexible Netflow' here:
http://tools.cisco.com/ITDIT/CFN/jsp/by-feature-technology.jsp
The feature is available in its basic from in some 12.4 releases as well as 15.x .
10-01-2013 02:29 PM
but someone told me that need to upgrade the IOS to 15.0(1)SE
Rawa,
If your switch has a 16 mb flash, then you will not be able to load IOS versions from 12.2(58)SE and higher. The highest IOS version you can load on a switch with 16 mb flash is 12.2(55)SE (and later).
10-01-2013 11:39 PM
Dears
thats memory Capacity of my Switch
cisco WS-C3750X-24 (PowerPC405) processor (revision A0) with 262144K bytes of memory.
whats your recomendation ?
10-01-2013 11:51 PM
cisco WS-C3750X-24
That's not right.
The IOS filenames you've mentioned on the opening thread is for a 3750/3750G. IF you have a 3750X then you will not be able to load the IOS because they are meant for a different model of the switch.
My recommendation is to stick with 12.2(55)SE8.
10-02-2013 12:12 AM
Right MR Leo
because yesterday i tried to upgrade the ios , i faced the following
Switch#copy tftp: flash
Address or name of remote host []? 172.16.1.2
Source filename []? c3750e-universalk9-tar.150-2.SE1
Destination filename [c3750e-universalk9-tar.150-2.SE1]?
Accessing tftp://172.16.1.2/c3750e-universalk9-tar.150-2.SE1...
%Error opening tftp://172.16.1.2/c3750e-universalk9-tar.150-2.SE1 (No such file or directory)
is it related to your mention ?
10-02-2013 04:51 AM
%Error opening tftp://172.16.1.2/c3750e-universalk9-tar.150-2.SE1 (No such file or directory)
That's wrong. Look at the filename you've specified. There's no file extension. Of course the response from the switch is, "where is this file you are talking about".
10-02-2013 06:39 AM
DEAR
PLEASE HELP ME AS SOON AS POSSIBLE
i upgraded the Switch , during botting i faced it and dont be complete
Switch uptime is 8 minutes, 15 seconds
cisco WS-C3750X-24 (PowerPC405) processor (revision A0) with 262144K bytes of memory.
Processor board ID FDO1701W1GR
01:35:45 UTC Wed Mar 30 2011: Unexpected exception to CPUvector 700, PC = FFFFFF2C
-Traceback= 0xFFFFFF2Cz
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.2(1)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 27-Aug-13 11:06 by prod_rel_team
Program Exception (0x0700)!
SRR0 = 0x04002F60 SRR1 = 0x00029230 SRR2 = 0x02898534 SRR3 = 0x00029230
ESR = 0x08000000 DEAR = 0x00000000 TSR = 0x84000000 DBSR = 0x00000000
CPU Register Context:
Vector = 0x00000700 PC = 0x04002F60 MSR = 0x00029230 CR = 0x35000053
LR = 0x02005414 CTR = 0x00000000 XER = 0xE0000010
R0 = 0x00000000 R1 = 0x055D6E80 R2 = 0x00000000 R3 = 0x055D6EA0
R4 = 0x00000031 R5 = 0x055D6F54 R6 = 0x00000018 R7 = 0x0534A693
R8 = 0x0000001D R9 = 0x0534A690 R10 = 0x00000017 R11 = 0x00000050
R12 = 0x00000000 R13 = 0x0B98279C R14 = 0x00688E58 R15 = 0x00000002
R16 = 0x00000000 R17 = 0x0534A690 R18 = 0x00000001 R19 = 0x00000099
R20 = 0x04E2CDCD R21 = 0x051D0000 R22 = 0x00000000 R23 = 0x00000002
R24 = 0x00000001 R25 = 0x055D6ED4 R26 = 0x04E2C9F8 R27 = 0x00000036
R28 = 0x00000004 R29 = 0x04E2C9D8 R30 = 0x05FEE5D8 R31 = 0x0000003A
Stack trace:
PC = 0x04002F60, SP = 0x055D6E80
Frame 00: SP = 0x055D6F98 PC = 0x020052CC
Frame 01: SP = 0x055D70C8 PC = 0x02006668
Frame 02: SP = 0x055D70E8 PC = 0x02006CCC
Frame 03: SP = 0x055D7198 PC = 0x02006FB4
Frame 04: SP = 0x055D71B8 PC = 0x028D881C
Frame 05: SP = 0x055D71F8 PC = 0x026BC780
Frame 06: SP = 0x055D7208 PC = 0x022AA47C
Frame 07: SP = 0x055D7228 PC = 0x022AA648
Frame 08: SP = 0x055D7240 PC = 0x022AA798
Frame 09: SP = 0x055D7270 PC = 0x00688C68
Frame 10: SP = 0x055D7378 PC = 0x00688EA0
Frame 11: SP = 0x055D7380 PC = 0x02D5771C
Frame 12: SP = 0x00000000 PC = 0x02D51C54
Switch uptime is 8 minutes, 18 seconds
cisco WS-C3750X-24 (PowerPC405) processor (revision A0) with 262144K bytes of memory.
Processor board ID FDO1701W1GR
01:35:48 UTC Wed Mar 30 2011: Unexpected exception to CPUvector 700, PC = FFFFFF2C
-Traceback= 0xFFFFFF2Cz
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.2(1)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 27-Aug-13 11:06 by prod_rel_team
Program Exception (0x0700)!
SRR0 = 0x04002F60 SRR1 = 0x00029230 SRR2 = 0x02898534 SRR3 = 0x00029230
ESR = 0x08000000 DEAR = 0x00000000 TSR = 0x84000000 DBSR = 0x00000000
CPU Register Context:
Vector = 0x00000700 PC = 0x04002F60 MSR = 0x00029230 CR = 0x35000053
LR = 0x02005414 CTR = 0x00000000 XER = 0xE0000010
R0 = 0x00000000 R1 = 0x055D6E80 R2 = 0x00000000 R3 = 0x055D6EA0
R4 = 0x00000031 R5 = 0x055D6F54 R6 = 0x00000018 R7 = 0x0534A693
R8 = 0x0000001D R9 = 0x0534A690 R10 = 0x00000017 R11 = 0x00000050
R12 = 0x00000000 R13 = 0x0B98279C R14 = 0x00688E58 R15 = 0x00000002
R16 = 0x00000000 R17 = 0x0534A690 R18 = 0x00000001 R19 = 0x00000099
R20 = 0x04E2CDCD R21 = 0x051D0000 R22 = 0x00000000 R23 = 0x00000002
R24 = 0x00000001 R25 = 0x055D6ED4 R26 = 0x04E2C9F8 R27 = 0x00000036
R28 = 0x00000004 R29 = 0x04E2C9D8 R30 = 0x05FEE5D8 R31 = 0x0000003A
Stack trace:
PC = 0x04002F60, SP = 0x055D6E80
Frame 00: SP = 0x055D6F98 PC = 0x020052CC
Frame 01: SP = 0x055D70C8 PC = 0x02006668
Frame 02: SP = 0x055D70E8 PC = 0x02006CCC
Frame 03: SP = 0x055D7198 PC = 0x02006FB4
Frame 04: SP = 0x055D71B8 PC = 0x028D881C
Frame 05: SP = 0x055D71F8 PC = 0x026BC780
Frame 06: SP = 0x055D7208 PC = 0x022AA47C
Frame 07: SP = 0x055D7228 PC = 0x022AA648
Frame 08: SP = 0x055D7240 PC = 0x022AA798
Frame 09: SP = 0x055D7270 PC = 0x00688C68
Frame 10: SP = 0x055D7378 PC = 0x00688EA0
Frame 11: SP = 0x055D7380 PC = 0x02D5771C
Frame 12: SP = 0x00000000 PC = 0x02D51C54
10-02-2013 08:46 PM
Rawa,
Your switch is crashing.
Hold down the MODE button and apply power to the switch. Keep holding the MODE button for about 20 seconds and release,
Who told you to or recommended to you to upgrade to 15.2(1)E?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide