cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
474
Views
0
Helpful
3
Replies

ios issue with vlan update

alirogers_
Level 1
Level 1

Hi, I am trying to change the default IP address in vlan 1 on a cisco 861 but everything I do so my connection via SSH hangs and all ssh/telnet attempts are refused.

my commands are as followed:

int vlan 1

ip address 192.168.1.1 255.255.255.0

[hangs]

my current vlan 1 address is 10.10.10.1 255.255.255.0

my vlan1pool on dhcp

is an address range of 192.168.1.0/24

do i need to update something in the authenication to allow connections from 192.168.1.0/24 instead of 10.10.10.0/24

3 Replies 3

Tagir Temirgaliyev
Spotlight
Spotlight

hi

do i need to update something in the authenication to allow connections from 192.168.1.0/24 instead of 10.10.10.0/24

yes you do if there is for example ACL preventing VTY access

or put here full running-config

I have attached the configuration below, hope it helps

access-list 1 permit 192.168.1.0 0.0.0.255

access-list 23 permit 10.10.10.0 0.0.0.7

no cdp run

banner exec ^C

Blank Exe^C

banner login ^Canner

BLANK LOGIN BANNER

^C

!

line con 0

login local

line aux 0

line vty 0 4

access-class 23 in

privilege level 15

login local

transport input telnet ssh

!

end

I have found the issue, it is the line 'access-class 23 in' to allow my new address sheme i needed to change it to 'access-class 1 in'

All working now

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: