ios issue with vlan update

[alirogers_]

Hi, I am trying to change the default IP address in vlan 1 on a cisco 861 but everything I do so my connection via SSH hangs and all ssh/telnet attempts are refused.

my commands are as followed:

int vlan 1

ip address 192.168.1.1 255.255.255.0

[hangs]

my current vlan 1 address is 10.10.10.1 255.255.255.0

my vlan1pool on dhcp

is an address range of 192.168.1.0/24

do i need to update something in the authenication to allow connections from 192.168.1.0/24 instead of 10.10.10.0/24

[Tagir Temirgaliyev]

hi

do i need to update something in the authenication to allow connections from 192.168.1.0/24 instead of 10.10.10.0/24

yes you do if there is for example ACL preventing VTY access

or put here full running-config

[alirogers_]

I have attached the configuration below, hope it helps

access-list 1 permit 192.168.1.0 0.0.0.255
access-list 23 permit 10.10.10.0 0.0.0.7
no cdp run
banner exec ^C
Blank Exe^C
banner login ^Canner
BLANK LOGIN BANNER
^C
!
line con 0
 login local
line aux 0
line vty 0 4
 access-class 23 in
 privilege level 15
 login local
 transport input telnet ssh
!
end

[alirogers_]

I have found the issue, it is the line 'access-class 23 in' to allow my new address sheme i needed to change it to 'access-class 1 in'

All working now