ios to catos conversion on supervisor 720

[abdul.khan]

Hi I have been using the catos to ios conversion document on the cisco website to convert a couple of cisco sup720 to catos for back and the procedure doesnt seem to be working.

It tells you to use a runtime image such as c6msfc3-jsv-mz.122-14.sx2 and i am unable to download this runtime image from the cisco website or any  of the later releases.

Will this procedure not work with one of these images ??

[Dale Miller]

c6msfc3-jsv-mz.122-14.sx2 is an MSFC image. You can run CatOS without using the MSFC but you will lose all L3 functionality. I am not sure where you were looking on the download page so here is where you want to look from cisco.com.

Products

Switches

LAN Switches - Core

Cisco Catalyst 6500 Series Switches

Cisco Catalyst 6509-E Switch

Cisco Catalyst 6000 Series Multilayer Switch Feature Card 3 (MSFC3)

IOS for MSFC

here is a link directly to the page.

http://www.cisco.com/cisco/software/release.html?mdfid=282211232&flowid=3322&softwareid=280805681

HTH,

Dale