cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1154
Views
0
Helpful
2
Replies

ip address forwarding

Hi

in our org we have 6509 has the core switch but it as not gateway because our gateway to the internet is thru a proxy server. but we have another connection outside if we want to use static routes. But since static routes is for destination, i want a particular server to redirect it the another connection

so need any suggestions on it ..its literally forwarding an ip address or a host to another interface

Karthik

1 Accepted Solution

Accepted Solutions

Reza Sharifi
Hall of Fame
Hall of Fame

Hello Karthik,

You can use PBR to achieve that.  Take a look at this link for examples:

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481d.shtml

HTH

Reza

View solution in original post

2 Replies 2

Reza Sharifi
Hall of Fame
Hall of Fame

Hello Karthik,

You can use PBR to achieve that.  Take a look at this link for examples:

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481d.shtml

HTH

Reza

Ganesh Hariharan
VIP Alumni
VIP Alumni

Hi

in our org we have 6509 has the core switch but it as not gateway because our gateway to the internet is thru a proxy server. but we have another connection outside if we want to use static routes. But since static routes is for destination, i want a particular server to redirect it the another connection

so need any suggestions on it ..its literally forwarding an ip address or a host to another interface

Karthik


Hi Karthik,

If you want TCP/IP forwarding in server to server  check out the below link,

http://support.microsoft.com/kb/323339

HTH

Ganesh.H

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: