07-31-2007 07:07 PM - edited 03-05-2019 05:37 PM
Prompt how to make on 6509 ip source guard.
On 3750 I did so:
ip source binding xxxx.xxxx.xxxx vlan x ip.ip.ip.ip interface Gi1/0/1 on 65 this command does not work:
MR(config)#ip source?
source source-route
MR(config)#ip source ?
% Ambiguous command: "ip source "
ios - 72033-adventerprisek9_wan-mz.122-18. SXF7
08-01-2007 05:51 AM
What exactly are you trying to accomplish ?
08-01-2007 07:08 PM
If I activate ip dhcp snooping, ip arp inspection and ip verify source on cat3750 clients received ip from a server dhcp can normally work.
If the client independently puts to itself ip accordingly cannot work. That also it is necessary for us.
But for the active equipment which stands up for 3750, I register ip source binding, differently they are not accessible.
That is it is necessary to forbid for clients to put ip, even the from dhcp, but to allow some devices to have the static address.
The same to me needs to be made on cat6509.
08-22-2007 09:45 PM
help me pls :)
10-19-2007 06:54 AM
Hi,
I think you have to configure the ports which are allowed to set ip addresses by their own as trusted. So in that case the dhcp snooping, because both the ip source guard and DIA based on DHCP snooping or (static entries).
Hope it helps, rate if does
Krisztian
10-21-2007 05:42 PM
Hi!
In itself DHCP snooping works, I cannot make static records, there is no command ip source binding.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide