04-25-2016 02:58 AM - edited 03-08-2019 05:29 AM
Hi.. I have been running nexus 9396PX-n9000-dk9.6.1.2.I3.4a.bin. I want to configure IPSLA and track on this device but unable to configure it.
Does this device support IPSLA.
CoreSW(config)# feature ?
bash-shell Enable/Disable bash-shell
bfd Bfd
bgp Enable/Disable Border Gateway Protocol (BGP)
dhcp Enable/Disable DHCP Manager
eigrp Enable/Disable Enhanced Interior Gateway Routing Protocol (EIGRP)
evmed Enable/Disable Generic event detectors
hsrp Enable/Disable Hot Standby Router Protocol (HSRP)
interface-vlan Enable/Disable interface vlan
isis Enable/Disable IS-IS Unicast Routing Protocol (IS-IS)
lacp Enable/Disable LACP
ldap Enable/Disable ldap
lldp Enable/Disable LLDP
msdp Enable/Disable Multicast Source Discovery Protocol (MSDP)
ntp Enable/Disable NTP
nv Enable/Disable VxLAN
nxapi Enable/Disable nxapi
ospf Enable/Disable Open Shortest Path First Protocol (OSPF)
ospfv3 Enable/Disable Open Shortest Path First Version 3 Protocol (OSPFv3)
password Credential(s) for the user(s)/device(s)
pbr Enable/Disable Policy Based Routing(PBR)
pim Enable/Disable Protocol Independent Multicast (PIM)
private-vlan Enable/Disable private-vlan
privilege Enable/Disable IOS type privilege level support
rip Enable/Disable Routing Information Protocol (RIP)
scheduler Enable/Disable scheduler
scp-server Enable/Disable SCP server
sftp-server Enable/Disable SFTP server
ssh Enable/Disable ssh
tacacs+ Enable/Disable tacacs+
telnet Enable/Disable telnet
tunnel Enable/Disable Tunnel Manager
udld Enable/Disable UDLD
vmtracker Enable/Disable VM Tracker feature
vn-segment-vlan-based Enable/Disable VLAN based VN segment
vpc Enable/Disable VPC (Virtual Port Channel)
vrrp Enable/Disable Virtual Router Redundancy Protocol (VRRP)
vtp Enable/Disable VTP
===========================================================================
CoreSW(config)# ip ?
access-list Configure access list
adjacency Configure Adjmgr
adjmgr AM information
arp Configure ARP parameters
as-path BGP autonomous system path filter
auto-discard Auto 0.0.0.0/0 discard route
community-list Add a community list entry
dhcp Configure DHCP snooping or relay
dns Configure dns client
domain-list Add additional domain names
domain-lookup Enable/Disable DNS
domain-name Specify default domain name
extcommunity-list Add a extcommunity list entry
ftp Configure FTP client
host Add an entry to the ip hostname table
http Configure HTTP client
icmp-errors ICMP unreachable/TTL-exceeded/param-prob messages
igmp IGMP global configuration commands
internal Show internal information
load-sharing ECMP load-sharing
mfwd Configures Global IP Multicast Forwarding
mroute Configure multicast RPF static route
multicast Configure IP multicast global parameters
name-server Specify nameserver address
prefix-list Build a prefix list
radius Radius server
route Route information
routing Routing information
source Configure source-address for applications
source-route IP source routing option
tcp Global TCP parameters
telnet Configure telnet
tftp Configure TFTP client
traceroute Configure traceroute client
Solved! Go to Solution.
04-25-2016 04:28 AM
Its is supported from v7 as below should be feature sla available are on v6
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/ip_sla/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_IP_SLAs_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_IP_SLAs_Configuration_Guide_7x_chapter_010.html
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 9000 Series NX-OS IP SLAs Configuration Guide.
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
IP SLA support |
Initial support |
7.0(3)I2(1) |
04-25-2016 04:28 AM
Its is supported from v7 as below should be feature sla available are on v6
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/ip_sla/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_IP_SLAs_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_IP_SLAs_Configuration_Guide_7x_chapter_010.html
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 9000 Series NX-OS IP SLAs Configuration Guide.
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
IP SLA support |
Initial support |
7.0(3)I2(1) |
01-16-2018 08:24 AM
Hi, I have version NXOS: version 7.0(3)I7(1) and the feature is not there yet!
Software
BIOS: version 07.59
NXOS: version 7.0(3)I7(1)
BIOS compile time: 08/26/2016
NXOS image file is: bootflash:///nxos.7.0.3.I7.1.bin
NXOS compile time: 8/31/2017 14:00:00 [08/31/2017 18:29:32]
Hardware
cisco Nexus9000 C9236C chassis
Intel(R) Xeon(R) CPU @ 1.80GHz with 16400580 kB of memory.
is there something that I need to activate?
thanks,
Marc
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: