I have in my project IPTV system (Head End with multicast) this head end connect directly to L2 2960s and this switch connect to core switch 6905e and i want to know what shall I do to be able to enable the multicast to my IPTV set top boxes. I have vlan 121 for IPTV in the core switch 10.60.120.1/22.
I enabled the ip igmp snooping on all switches and I enabled the ip igmp snooping quierer in the core switch
my config in the core:
no ip domain-lookup ip multicast-routing ip igmp snooping querier address 10.60.120.1 ip igmp snooping querier ! switch virtual domain 13 switch mode virtual ! ! ! mvr vlan 121 mvr querytime 10 mvr
My config in the 2960s which connect directly to IPTV servers and Head End (Multicast):
ip igmp snooping querier ip igmp snooping vlan 121 querier address 10.60.120.1 !
this port in 2960s which connected directly to the Head End:
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.
Introduction to SD-Access Multicast
The document describes the Cisco DNAC UI workflow introduced as part of the Cisco DNA Center1.3.3 release. The document covers the components of Multicast forwarding on SD-Access fabric and the configuration pushed to...
Coming soon - Be the first to know about the New Product/Release Series. Join Customer Connection to register for the briefings throughout the month of October!
Membership in the Cisco Customer Connection program is required to attend. Registra...