04-20-2018 12:23 AM - edited 03-08-2019 02:44 PM
Hello,
We have installed quite a big number of Cisco 892FSP routers in our network and I wonder if we could use IOX on them.
I'm not completly sure if it's possible as I've read different papers talking about C819 and 800M but not a Word about C89xx.
Of course, I've given a try on a relatively new release, 15.6(3)M4, with no luck. I haven't had any clue with Feature Navigator either.
Hope somebody can help.
Regards,
Carles
Solved! Go to Solution.
04-20-2018 01:08 AM
Hello,
I think it is only supported on the IR809 and IR829 platforms. Check Table 2 in the attached IOx data sheet:
04-20-2018 01:08 AM
Hello,
I think it is only supported on the IR809 and IR829 platforms. Check Table 2 in the attached IOx data sheet:
04-20-2018 05:04 AM
Hi Georg,
I think you're righ. Thanks for pointing this out.
By the way, I have found another document stating there are other three 8xx Industrial models (C800m, C88x and C89x) supporting IOX. See https://www.cisco.com/c/en/us/products/cloud-systems-management/iox/index.html
Maybe some day we see other non-industrial models supporting this feature.
Thanks and regards,
Carles
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide