Is IOX supported on C892FSP?

[j-carles]

Hello,

  We have installed quite a big number of Cisco 892FSP routers in our network and I wonder if we could use IOX on them.

  I'm not completly sure if it's possible as I've read different papers talking about C819 and 800M but not a Word about C89xx.

  Of course, I've given a try on a relatively new release, 15.6(3)M4, with no luck. I haven't had any clue with Feature Navigator either.

  Hope somebody can help.

  Regards,

   Carles

[Georg Pauwen · Accepted solution]

Hello,

I think it is only supported on the IR809 and IR829 platforms. Check Table 2 in the attached IOx data sheet:

https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/iox/datasheet-c78-736767.html

[j-carles]

Hi Georg,

  I think you're righ. Thanks for pointing this out.

  By the way, I have found another document stating there are other three 8xx Industrial models (C800m, C88x and C89x) supporting IOX. See https://www.cisco.com/c/en/us/products/cloud-systems-management/iox/index.html

  Maybe some day we see other non-industrial models supporting this feature.

  Thanks and regards,

   Carles