05-05-2008 10:17 AM - edited 03-05-2019 10:46 PM
We are running the latest IOS 12.2(33)SXH2 on our L2 6504 and are trying to utilize the broadcast storm control command. When we enable the command on an interface, we get a command rejected response (see below). Can Broadcast control be ran on a 6500 and if so what other configurations must be made to enable this feature?
testswitch1.sba(config-if)#storm-control broadcast level 30
Command Rejected: Broadcast suppression is not supported on 3/1
Thanks,
-Scott
05-05-2008 10:40 AM
It looks like it is supported on your device, but not that particular port. Do you have port configuration available for us to look at?
05-05-2008 11:04 AM
Yeah below is the current port configuration that the storm-control broadcast xx command was applied to. FYI I also tried the command on the port after I removed the voice vlan command (so that the port was truly only an access port), and still receive the same error:
interface GigabitEthernet3/1
description Test PC and Phone
switchport
switchport access vlan xx
switchport mode access
switchport voice vlan xy
spanning-tree portfast
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide