11-06-2006 08:32 AM - edited 03-05-2019 12:38 PM
hi all, when i want to bring up my isdn line to a remote site say on 172.16.1.1/24, on my central router connected to this branch, would i use dialer list 1 protocol ip list 1
access list 1 permit 172.16.1.0 0.0.0.255 ?or do you permit source traffic , ie whats on the lan your connected ?
11-06-2006 08:58 AM
Carl
standard access lists use source address. This is what may have been the issue with your earlier conversation.
Put your lan address (source) in the ACL and put your destination address in the static route.
hth
Stu
11-07-2006 12:19 AM
Hi
Your lan traffic will be the souce which will be the interesting traffic to trigger DDR.
Thanks
Mahmood
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide