Switching

We recently ordered 3 x Cisco 3560 Switches. The main reason we bought these switches was to do some MSTP interworking between our own Layer 2 equipment and these Cisco switches. However, the Cisco switches do not follow the BPDU format described in ...

Hi,I wanted to restrict LAN to WAN (traffic going from one vlan to another vlan)traffic on a 3550 switch to particular bandwidth.Can some one help me in providing the required configuration.RegardsSivakondala Rao

Hi,We have two service providers and three Apnic ranges of /24. We are planning to install a 3825 router to connect the two service providers. I guess BGP would be an ideal solution if both service providers be connected in load balancing. I have che...

Hi All.I have a network with about 20 catalyst 3750 switches connected with each other with 'ring' topology. And all of them is in one VTP domain. One switch is acting as a VTP server and others are VTP clients. Now i need completely remove VTP from ...

It may be a very easy fix for this but I've recently installed a Cisco 4507 Switch at one of my locations and it's working great expect when I try to browse that subnet from my data center on a seperate subnet I cannot browse computers in that locati...

I purchased this switch on ebay, it does work (or at least it did before I deleted the files on it). I have followed the procedure to copy a file from via tftp and hyperterminal but get a permission denied error from hyperterminal and cannot connect...

Hi all, can someone tell me the different ways of advertising a default route in eigrp, i know the redistribute static, command, is there any other way of doing it ?

Can someone explain to me what native IOS is. what is the difference between native and whatever else there is.

I am thinking about upgrading to the sup32 at the core of my network, and came across the following q&a regarding the sup32, and wondered if somebody could help me get a better understanding.http://www.cisco.com/en/US/products/hw/switches/ps708/produ...

I have a 2621 router and flash was erased. Just for practicing purposes, I uploaded IOS version 11.3. I want to upgrade the IOS but I can't ping the TFTP server. I think it is because I could not configure a FA port and I only configured the Loopb...

Hi all,I have a problem.I have several sun servers here running solaris 10 with bge connectionswhen i do link aggregation between solaris and cisco 3550/3560 then that works.If i do the same thing on a CE500-12TC then for some reason that does not wo...