Issue adding 3850 to stack.

[nelsonfez]

I tried to change the switch but switch is in a boot loop and this is what I saw in console:

Final tar file: mcu_ucode_bundle_6_2_0.tar

Waiting for 120 seconds for other switches to boot

####

Chassis 5 reloading, reason - active removed before switch became ready

Jan 29 21:42:00.909 R0/0: %PMAN-5-EXITACTION: Process manager is exiting: reload fp action requested

shr_irq_signal_interrupt:865 no ip for irq 41:3Jan 29 21:42:09.409 R0/0: %PMAN-5-EXITACTION: Process manager is exiting: rp processes exit with reload switch code

octeon_wdt: WDT device closed unexpectedly.  WDT will not stop!

reboot: Restarting system

[marce1000]

   - Presuming a bug , make sure both stack members run recent software version and or advisory release

 M.

[Leo Laohoo]

Take that switch off the stack. 

Console into the switch and reboot. 
Post the entire bootup process.