07-27-2009 09:28 AM - edited 03-06-2019 06:58 AM
I have enable jumbo frame in our 6500 in gi2/2. The mtu shows 9216 under the swtich port configuration. Do I aslo need to enable jumbo frame in the server NIC that connect to port gi2/2. If I don't do that, is there any impact?
Thanks
07-27-2009 09:33 AM
If there is any large frame going out g2/2 towards your server, the switch will send it but the server will drop it.
It also happens the other way around if the server supports larger frames and the switch don't.
If you are not moving any frames larger than the default 1500 bytes then there is no problem but in that case why enabling jumbo frame support on the switch interface?
07-27-2009 10:02 AM
So, will it hurt to enable jumbo frame in Cisco switch even I have no jmbo frame send in and out?
07-27-2009 10:09 AM
It won't matter to enable it if you are not using large grames but if you are then the switch will forward/receive them just fine but you end devices (servers) may drop them
07-28-2009 11:25 AM
I enabled jumbo frame in every port, it hows mtu 9216 in every port. But when I showed vlan, I saw the vlan mtu is still 1500. Do I also need to change the Vlan MTU, or the vlan mtu has no actual effect.
Thanks
07-27-2009 10:48 AM
Hello Tak,
>> o, will it hurt to enable jumbo frame in Cisco switch even I have no jmbo frame send in and out?
There is always a price to pay for everything you enable on a device.
In the case of jumbo frames the port buffers can be reorganized to be able to handle so big frames so you may get shorter input and output buffers that in some linecards can have an impact.
Hope to help
Giuseppe
07-28-2009 12:28 PM
also remember if you HAVE jumbo frames running in your network you will need have jumbo enabled all the way thru and not just on the end station port.
07-29-2009 01:52 AM
when I implemented Jumbo frames, i had to implement MTU changes at both the VLAN level as well as port level. Since I have a trunk running to another switch I had to change the port channel setting MTU too. But as a best practice I was adviced that jumbo frame traffic be kept on separate vlan.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide