Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hi,Our client has 2 cisco 3750 switches stacked together and we are seeing strange issues when configuring the switches. When i configure 2 ports on the lefthandside of our switch ex. port 1/0/1 and 2/0/1 my channel is working. When I copy the same c...

Hoping someone can help me make some sense of this...Nov 5 12:59:43 UTC: %PLATFORM-1-CRASHED: System previously crashed with the following message: (sc-us-alt-002-1)Nov 5 12:59:43 UTC: %PLATFORM-1-CRASHED: Cisco IOS Software, C3750 Software (C3750-...

jonesm111 by Level 1
  • 1104 Views
  • 4 replies
  • 0 Helpful votes

Anyone ever come a cross a switch that would not allow a macbook connected to it to copy a folder from a mac server when one of the files in the folder was a PDF file? Background:We have four switches (1 c3560G, this is the head switch back to server...

Hi all,I have a couple of questions concerning L2 etherchannels. Can you please help?1- Is there a way to increase drastically the STP port cost of an unbundled etherchannel interface, forcing the traffic to be switched to another interface? As an ex...

C6500-SUP720-3B#wr %No memory available: Update of NVRAM config failed! ---------------------------------------has anyone a explanation ? the Configuration is not that big it should definitl...

e.hoehn by Level 1
  • 1960 Views
  • 3 replies
  • 0 Helpful votes

Hi,I have a stack of 7 3750s, all on the same IOS, 12.2.25 IP base. Today the entire stack stopped passing traffic and there was one switch cycling power and not booting up all the way when it got to detecting the stackwise portion of the POST tests....

Hi,I am facing an issue with GW redundancy using HSRP. When the active link goes down, the switchover to standby link takes less than 300ms. But when the active link comes back, there is a packet drop for more than 1 sec. It seems to be for return tr...

prakashj by Level 1
  • 760 Views
  • 2 replies
  • 0 Helpful votes

I have a Catalyst 3560-48TS-S running IPBASE ver 12.2(35)SE5 IOS.When I do show mac-address-table dynamic it only shows the addresses it is learning via its uplink port Gi0/1. No addresses are shown for any of its Fast Ethernet interfaces. I haven't ...

markrawson by Level 1
  • 15429 Views
  • 4 replies
  • 0 Helpful votes

Hi,In practical Scenario when to use MSTP and PVST.What is difference between bpdugard and Bpdufilter.

nasr.khan by Level 1
  • 1544 Views
  • 5 replies
  • 0 Helpful votes