L3 switch routing not working

[farhadsultani]

Dear all,

I have a catalyst 4500 series swtich version (cat4500e-UNIVERSAL-M), Version 03.08.01.E

I am connected to another L3 switch which conneting me to the internet and I name it internet_switch.

From the port which is directely connected to the internet_switch I am able to ping internet, but from other port which is connected to my pc (different subnet) and is routed port, I am not able to ping internet. 

ip routing is enabled, default route is configured on 4500 series switch, and also I have a static route towards my 4500 series switch  for my pc subnet.

Any one can help me solve this issue.

Thanks in advance.

[Predrag Jovic]

General tshoot steps:

• Check status of SVI for specific VLAN that you are testing (when host is plugged in port that belong to specific VLAN):
  • sh int status
  • sh ip int brief
• Check routing table (are all routes present - including default route):
  • sh ip route
• Check IP address and gateway configuration on host
  • ipconfig
• Check your natting configuration on router are all subnets included in natting
• Perform traceroute and/or ping from host to WAN interface to make sure that your local traffic is forwarded properly

[farhadsultani]

ports are up, same senario working with other switches which are currentely in use, but not with this one. 

[Predrag Jovic]

Maybe switch uses LAN base license?

sh license

sh license image level

[farhadsultani]

Already tried Vlan too, not worked. 

[farhadsultani]

Core_Switch#show license summary
Index 0 Feature: entservices
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 1 Feature: ipbase
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 2 Feature: lanbase
Period left: 1513 weeks 1 day
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
Index 3 Feature: internal_service
Period left: 0 seconds

Core_Switch#
Core_Switch#
Core_Switch#sh license image level
Module name Image level Priority Configured Valid license
--------------------------------------------------------------------
WS-C4500X-16 entservices 1 NO entservices
ipbase 2 NO ipbase

Module Name Role Current Level Reboot Level
--------------------------------------------------------------------
WS-C4500X-16 Active ipbase ipbase

[Georg Pauwen]

Hello,

is the other subnet included in the NAT statements which are configured on the switch that is directly connected to the Internet ?

Best and fastest way to resolve this is to post the configurations of both switches.

[farhadsultani]

I am using public IP no need to use NAT, and using same scenario with other switches in my network all is working well. 
I think might be something with the 4500 series switch.

[Seb Rupik]

Hi there,

Could you possibly attach the configs of both switches for us to look at?

cheers,

Seb.