08-28-2017 10:51 PM - edited 03-08-2019 11:52 AM
Dear all,
I have a catalyst 4500 series swtich version (cat4500e-UNIVERSAL-M), Version 03.08.01.E
I am connected to another L3 switch which conneting me to the internet and I name it internet_switch.
From the port which is directely connected to the internet_switch I am able to ping internet, but from other port which is connected to my pc (different subnet) and is routed port, I am not able to ping internet.
ip routing is enabled, default route is configured on 4500 series switch, and also I have a static route towards my 4500 series switch for my pc subnet.
Any one can help me solve this issue.
Thanks in advance.
08-28-2017 11:32 PM - edited 08-28-2017 11:35 PM
General tshoot steps:
08-29-2017 12:08 AM
ports are up, same senario working with other switches which are currentely in use, but not with this one.
08-29-2017 12:20 AM - edited 08-29-2017 12:21 AM
Maybe switch uses LAN base license?
sh license
sh license image level
08-29-2017 12:37 AM
Already tried Vlan too, not worked.
08-29-2017 01:04 AM
Core_Switch#show license summary
Index 0 Feature: entservices
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 1 Feature: ipbase
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 2 Feature: lanbase
Period left: 1513 weeks 1 day
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
Index 3 Feature: internal_service
Period left: 0 seconds
Core_Switch#
Core_Switch#
Core_Switch#sh license image level
Module name Image level Priority Configured Valid license
--------------------------------------------------------------------
WS-C4500X-16 entservices 1 NO entservices
ipbase 2 NO ipbase
Module Name Role Current Level Reboot Level
--------------------------------------------------------------------
WS-C4500X-16 Active ipbase ipbase
08-28-2017 11:50 PM
Hello,
is the other subnet included in the NAT statements which are configured on the switch that is directly connected to the Internet ?
Best and fastest way to resolve this is to post the configurations of both switches.
08-29-2017 12:04 AM
I am using public IP no need to use NAT, and using same scenario with other switches in my network all is working well.
I think might be something with the 4500 series switch.
08-29-2017 12:42 AM
Hi there,
Could you possibly attach the configs of both switches for us to look at?
cheers,
Seb.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide