03-17-2011 12:11 AM - edited 03-06-2019 04:07 PM
Hello, has anyone successfully
usedlacp to connect to an Enterasys C2 (or A2 for that matter) switch? The connection works from the 3650 to a 3550. The Enterasys lag works from the C2 to an A2 but when I try to connect the 3750 to the C2 the port-channel won't come up.
core#sh ether 1 detail
Group state = L2
Ports: 2 Maxports = 16
Port-channels: 1 Max Port-channels = 16
Protocol: LACP
Ports in the group:
-------------------
Port: Gi1/0/47
------------
Port state = Up Sngl-port-Bndl Mstr Not-in-Bndl
Channel group = 1 Mode = Active Gcchange = -
Port-channel = null GC = - Pseudo port-channel = Po1
Port index = 0 Load = 0x00 Protocol = LACP
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
A - Device is in active mode. P - Device is in passive mode.
Local information:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
Gi1/0/47 SA indep 32768 0x1 0x1 0x2F 0x7D
Age of the port in the current state: 0d:00h:01m:19s
Port: Gi1/0/48
------------
Port state = Up Sngl-port-Bndl Mstr Not-in-Bndl
Channel group = 1 Mode = Active Gcchange = -
Port-channel = null GC = - Pseudo port-channel = Po1
Port index = 0 Load = 0x00 Protocol = LACP
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
A - Device is in active mode. P - Device is in passive mode.
Local information:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
Gi1/0/48 SA indep 32768 0x1 0x1 0x30 0x7D
Age of the port in the current state: 0d:00h:01m:15s
Port-channels in the group:
---------------------------
Port-channel: Po1 (Primary Aggregator)
------------
Age of the Port-channel = 0d:01h:16m:00s
Logical slot/port = 10/1 Number of ports = 0
HotStandBy port = null
Port state = Port-channel Ag-Not-Inuse
Protocol = LACP
Time since last port bundled: 0d:00h:09m:18s Gi1/0/47
Time since last port Un-bundled: 0d:00h:06m:46s Gi1/0/47
core#
Any ideas?
Thanks
03-17-2011 11:00 PM
Just an update if someone else is stuck, I changed the C2 to remove any
reference to static ports and the link comes up. Don't know why. Hopefully someone at Enterasys can provide an idea..
Thanks to those that looked.
John
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide