cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
124909
Views
165
Helpful
8
Replies

LAN Lite Image Vs LAN Base Image

abdulwalicisco7
Level 1
Level 1

what is the defferent between  LAN Lite Image Vs LAN Base Image in Cisc switch WS-C2960-PC-L  and WS-C2960-PC-S ?

and it possible to upgrade  LAN Lite Image in switch WS-C2960 -PC-S  to LAN Base Image ?

1 Accepted Solution

Accepted Solutions

Souvik Ghosh
Cisco Employee
Cisco Employee

LAN base image is a superset of LAN lite image. Few of the lan base  features mainly PoE , RPS support, CWDM SFP support ( support for the above features are avaiable in lan base image only after a certain version)  are not available in LAN lite image. For detail feature comparison please refer to the below link to the feature navigator.

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

2960-S switches are new L2 switches which are stackable like our old 3750 switches.

i am looking at the software download page. For 2960-S lan base image is not available.

http://www.cisco.com/cisco/software/release.html?mdfid=282644796&flowid=2565&softwareid=280805680&release=12.2.53-SE1&rellifecycle=ED&relind=AVAILABLE&reltype=all

View solution in original post

8 Replies 8

sdheer
Cisco Employee
Cisco Employee

Q. What are the notable differences between the Cisco Catalyst 2960 LAN Base and LAN Lite switches? 

A. Cisco Catalyst 2960 LAN Base switches have several advantages: 

• Gigabit Ethernet connectivity in 8-, 24-, and 48-port configurations 

• RPS support and support for a wide range of SFP transceivers 

• Enhanced security through Layer 2-4 access control lists (ACLs), DHCP Snooping, and more extensive Network Admission Control capabilities such as Web authentication and 802.1x enhancements

• Additional QoS capabilities: The LAN Base IOS supports policing, class and policy maps, differentiated services code point (DSCP), AutoQoS, and configurable queue weights, buffers, and thresholds 

• Higher network-level availability with features such as Flex Links and Link State Tracking  •

Increased number of VLANs (256) and other enhancements such as IPv6 Host, MLD Snooping, LLDP-MED, RSPAN, MVR, DHCP Option 82, and IP SLA (responder) 

 

Q. Can I upgrade or downgrade a Cisco Catalyst 2960 Switch between the LAN Base and LAN Lite IOS images?

A. No. Cisco Catalyst 2960 Series Switches cannot be upgraded from LAN Lite to LAN Base and cannot be downgraded from LAN Base to LAN Lite.  http://tools.cisco.com/squish/16852  

The LAN Base image (9.7MB) is bigger than the LAN Lite (8MB) but it has the same DRAM and flash requirements   

** please rate the reply if you find it useful **

I find this information useful  for me

Thanks

how do you recover your switch back if you mistakenly install a lanbase iOS on a lan lite swtich

I have a question. Does LAN base support 3rd party SFPs? Do LAN Lite support 3rd party SFPs?? Thanks in advance.

Souvik Ghosh
Cisco Employee
Cisco Employee

LAN base image is a superset of LAN lite image. Few of the lan base  features mainly PoE , RPS support, CWDM SFP support ( support for the above features are avaiable in lan base image only after a certain version)  are not available in LAN lite image. For detail feature comparison please refer to the below link to the feature navigator.

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

2960-S switches are new L2 switches which are stackable like our old 3750 switches.

i am looking at the software download page. For 2960-S lan base image is not available.

http://www.cisco.com/cisco/software/release.html?mdfid=282644796&flowid=2565&softwareid=280805680&release=12.2.53-SE1&rellifecycle=ED&relind=AVAILABLE&reltype=all

I find this informations useful  for me

Thanks

LAN-Base-vs-IP-Base.jpg

 

let's make it simple

 

 

Hi,

Related to my experience, one of the high-light differences is the number of VLANs supported ,in LAN-lite switches.

In 2960 24PC-s it is possible change the vtp mode client to transparent if it would not support the related numbers in VTP messages. Vlans 1-50 and 108-148 were defined in VTP server.

You may this logging message if you type "terminal monitor" in telnet connections.

 

"VLAN manager changing device mode client to TRANSPARENT"

like this:

client to transparent.png

Review Cisco Networking for a $25 gift card