01-03-2018 01:16 AM - edited 03-08-2019 01:17 PM
If I want to upgrade Lanbase software to IPBase or IPService on cisco 3650 switch, then need have any license to upgrade the software? Or just need to upgrade IOS software generally we did it?
01-03-2018 01:19 AM - edited 01-03-2018 01:22 AM
You need to buy a license , apply the software and then apply the license to the switch
license install ......
if you want to test before you buy you could use an evaluation license for I think 60 or 90 days and then it will revert back to the original license if you don't apply the full license
01-03-2018 01:50 AM
01-03-2018 01:53 AM
01-03-2018 02:00 AM
01-03-2018 02:13 AM
01-03-2018 02:23 AM
01-03-2018 02:27 AM
01-03-2018 02:31 AM
01-03-2018 02:33 AM
04-05-2019 02:04 AM
I got a question regarding that topic...
I wanted to add a new 3650 switch into a ipbase stack but license-mismatch occured. I recognized that the new one had only lanbase activated. Unfornunately I don't have further information of the buyer received yet so I though I could ask you. May it be bought with ipbase but it is simply not activated?
Below is the right-to-use output with index 3 ipbase permanent but not activated and index 4 only eval ipbase for 90 days.
Can I simply activate ipbase and reload the new switch or do I have to buy and upgrade to ipbase?
Switch#sh lic right-to-use det
Index 1
License Name : ipservices
Period left : Lifetime
License Type : permanent
License State : Not Activated
License Count : Non-Counted
License Location: Slot 2
Index 2
License Name : ipservices
Period left : 90
License Type : evaluation
License State : Not Activated
License Count : Non-Counted
License Location: Slot 2
Index 3
License Name : ipbase
Period left : Lifetime
License Type : permanent
License State : Not Activated
License Count : Non-Counted
License Location: Slot 2
Index 4
License Name : ipbase
Period left : 90
License Type : evaluation
License State : Not Activated
License Count : Non-Counted
License Location: Slot 2
Index 5
Thank you!
04-05-2019 02:41 AM - edited 04-05-2019 03:49 AM
Hi
Only you could know that if a license was purchased , switch doesnt show you that , you would need the PAK code off the person you purchased it off if a ipbase license was supplied with the switch
what you could do for now is activate it temporarily until; you get the license supported using evaluation license mode , i think you will get 60 or 90 days
EDIT:
use this command then add it to the stack
license right-to-use activate eval ipbase
04-05-2019 03:32 AM
Alright, I see. Thank you for all the information
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide