Learning multilple MAC address on the access port.

[Madhu]

Hello Team

I'm learning multiple MAC addresses from the access port where the laptop is connected through the Avaya phone. 

I have verified Physically and found that only Phone and Avaya are connected. 

Note: I did the R&D and found that, If I remove the ISE config from the port the result is positive which means only 2 MAC addresses are learning. 1-Laptop and 1-Avays. May I know the reason for this? 

Interface: Gi1/0/9 

[MHM Cisco World]

Run dhcp snooping and DAI 

That only solution I know for this case.