link teating method

[pratik gandhi]

Hi guys,

I want to test my internet link whic is of 4mbps. I want to understand how do we test this link on router, other than ping test wht could be done to check the thghput of. Link
Sent from Cisco Technical Support iPhone App

[Leo Laohoo]

www.speedtest.net    

[InayathUlla Sharieff]

Hi Pratik,

There are many third party tools to check the link, here are some below:

Here's free tool that I use from IXIA called Qcheck

http://www.ixiacom.com/products/display?skey=qcheck

IPerf: ( Install small iperf in a Station 1 and Station 2 and run it to get the graphical bandwidth value for that link.)

https://publishing.ucf.edu/sites/itr/cst/Pages/NSResources.aspx

http://en.wikipedia.org/wiki/Iperf

http://www.noc.ucf.edu/Tools/Iperf/

HTH

Regards

Inayath

********Plz rate all usefull posts.***************8

[pratik gandhi]

But wht if i wnt to test on router itself

I know thse apps which can test bt to test on router wht can we do

Sent from Cisco Technical Support iPhone App

[Edwin Summers]

Have you explored the IP SLA features and capabilities?

http://www.cisco.com/en/US/technologies/tk648/tk362/tk920/technologies_white_paper09186a00802d5efe.html

(h/t to Cadet Alain from thread: https://learningnetwork.cisco.com/thread/34999)

[parvinder.s]

Hi pratik,

router#sh int type module/slot command provides the 5 min avg. throughput.

thanks