cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
837
Views
0
Helpful
1
Replies

Load balance redundant WAN connections

matthubach
Level 1
Level 1

I have 2 WAN connections off of a 3750. One link connects to a MOE provider, while the other link off of the 3750 connects to a wireless provider. Currently, they are setup as active/standby. Is there any way to balance the load and utilize both links?

1 Reply 1

Joseph W. Doherty
Hall of Fame
Hall of Fame

Disclaimer

The    Author of this posting offers the information contained within this    posting without consideration and with the reader's understanding that    there's no implied or expressed suitability or fitness for any   purpose.   Information provided is for informational purposes only and   should not  be construed as rendering professional advice of any kind.    Usage of  this posting's information is solely at reader's own risk.

Liability Disclaimer

In    no event shall Author be liable for any damages whatsoever  (including,   without limitation, damages for loss of use, data or  profit) arising  out  of the use or inability to use the posting's  information even if  Author  has been advised of the possibility of such  damage.

Posting

How does the active/standby work now?  Are you running the 3750 as L2 or L3?

Review Cisco Networking for a $25 gift card