Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We started having issues with a number. The number is 4500 (omitting the full 10 digits). 4500 rings in on CenturyLink SIP Trunk. This has been working for years. No recent changes.4500 is a CTI Route Point for a UCCX trigger. We started getting comp...
Is there any way in callManager, to move a phone into a device pool that would reject the registration? I do not want a certain number of phones to register, but I do not want to delete them. Or some other way that would allow me to select a unique g...
Hello,Can anyone tell me how to create a report that lists all of the caller input options per subscriber? We are on CUC 11.5. I have the COBRAS export, but it is not clear on where that data for caller input is stored. The export I have from COBRAS ...
Hello, I have an Internet router. The external interface is running BGP towards the ISP. We are not doing any BGP peering, etc.. Basic BGP neighbor with ISP. The internal interface is running OSPF.
I have an IP SLA monitoring an upstream address 8....
What, if any, difference is there between these commands? This is how I see it configured:router# show run | sec ospfredistribute static metric 10 metric-type 1 subnets route-map static-to-ospforWould this be the same and/or overlapping:router# show ...
Stefan, Could you provide me with more details as far as what you did with the tunnel-pvt-group-id config you mentioned? I might be running into this problem as well. Do you have a print screen you can share? Thanks, -Matt
