Hi All
Setting up OTV for the first time. We are using multicast mode.
I have 2x OTV VDCs on one end, and a pair on the other:
Site2 OTV1 --- Site2 OTV2
| |
| |
Site1 OTV1 --- Site1 OTV2
Apparently, I see both the OTV2 VDC's have been working good, and formed adjacencies between themselves, but both site 1 OTV VDCs complain that they arent AED capable. Im not aware of a way to manually enable this on these VDCs. The configurations are MATCHED between the OTV VDC's and Core/Aggr VDCs.. Everything is exact same.
This is the output for show otv site
Local Edge Device Information:
Hostname R1-Demo-N7K-OTV1
System-ID 001b.54c2.a4c6
Site-Identifier 0000.0000.0002
Site-VLAN 501 State is Up
Site Information for Overlay150:
Local device is not AED-Capable (No Overlay Remote Adjacency up)
Neighbor Edge Devices in Site: 1
Hostname System-ID Adjacency- Adjacency- AED-
State Uptime Capable
--------------------------------------------------------------------------------
(null) b414.89dd.fa46 Partial 00:51:54 Yes
Regards
Raj