cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
273
Views
0
Helpful
2
Replies

Locally connected network is not reachable if PBR configured

SujithShaju
Level 1
Level 1

Hi

I am using 3750x L3 with IP service License, configured PBR using Route-Map.

My VLAN-1 is 10.20.0.0/22, VLAN-2 is 10.30.0.0/22. Two internet Gateways(fw) configured 192.168.1.0,192.168.2.0 

Traffic from VLAN-1 has to go via gateway 192.168.1.0 & traffic from VLAN-2 has to go via internet gateway 192.168.2.0,It is happening by creating a PBR,

but if am pinging IP in VLAN-1 to VLAN-2 it is not reaching it is also going via Gateway only.

Regards,

Sujith Shaju

1 Accepted Solution

Accepted Solutions

Mark Malone
VIP Alumni
VIP Alumni

Hey can you post the route-map configurations and the matching acls and if possible traceroute from source vlan to show the issue

View solution in original post

2 Replies 2

Mark Malone
VIP Alumni
VIP Alumni

Hey can you post the route-map configurations and the matching acls and if possible traceroute from source vlan to show the issue

Thanks mark,to looking in to it.  Issue got resolved, i have denied the traffic using  acl for the local VLANS in routemap match address. its started reaching connected networks using local routing table.

Review Cisco Networking for a $25 gift card