cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1087
Views
10
Helpful
5
Replies

Logging On Syslog

Sabby0115
Level 1
Level 1

Hello Friends

I have a question, is there any way to configure (logging or snmp on) the router so it can send all the typed cmd to syslog sever?

Regards

Sabby                  

1 Accepted Solution

Accepted Solutions

Ivan Shirshin
Cisco Employee
Cisco Employee

Hi Sarbjit,

There is a way to do that using the EEM script. A very good example can be seen in Ivan Pepelnyak blog:

http://blog.ioshints.info/2006/11/cli-command-logging-without-tacacs.html

Kind Regards,
Ivan

**Please grade this post if you find it useful.

Kind Regards,
Ivan

View solution in original post

5 Replies 5

Ivan Shirshin
Cisco Employee
Cisco Employee

Hi Sarbjit,

There is a way to do that using the EEM script. A very good example can be seen in Ivan Pepelnyak blog:

http://blog.ioshints.info/2006/11/cli-command-logging-without-tacacs.html

Kind Regards,
Ivan

**Please grade this post if you find it useful.

Kind Regards,
Ivan

Sandeep Choudhary
VIP Alumni
VIP Alumni

HI Sarbjit,

Yes you can .

Check out this web and attached document.

http://www.2000trainers.com/ccda-study-guide/snmp-configuration/

Regards

please rate if it helps.

Sabby0115
Level 1
Level 1

Thanks friends

Sent from Cisco Technical Support iPhone App

Srinivas N
Level 1
Level 1

Hi,

For syslog server, another easy way is some third party softwares also is there like... kiwi syslog server.........

Thanks & Regards,
Srinivas.

Hi Sarbjit,

If you are satisfied with these above  answers then please mark this question as answered, It can be it helpful for others.

Regards

please rate if it helps.