Switching

Hi,Is the WS-X6148A-GE-TX supported in Sup2 running IOS 12.1(27b)e4?  According to this URL, the min. IOS is 12.1(19)e1.http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Module_Installation/Mod_Install_Guide/02ethern.html#wp1041169Bu...

We have a 6506 running 12.1 ios, equipped with 4 blades X48 port each. On 2 seperate blades we are receiving ifin errors on ports 1-12, also"show int counter errors" indicate giants and rcv-errors on same ports. Adjacent ports to the 12 in question s...

Hi FolksWhat's the impact in term of performance   if y have Switch connected to other  switch and connected to other  switch than this switch connected to CORE  over fiber? switch1-------------GLC-SX-MM--------------->SWITCH2---------------GLC-SX-MM...

Hi FolksPls Have a Look to the Attachment,is okay in term in Redunsancy at the access Layer where 3750G Exist,I considered 1 Link fiber form 1st witch to first CORE while 2nd Link form the third switch going to the 2nd CORE,please Advise

Hi experts,Perl is one of the best software for the scripting.Is it possible to use Perl scripting for the network devices like Switch, Router and firewall etc.,If it is possible, please send some links for the reference.thanks in advance,Saravanan

Hi all,I'm trying to redistribute the statics the ASA injects using reverse-routing and its not doing it. It will redistribute static routes I add in there but not the ones injected via RRI. Here is the config I am using.ip local pool VPNPool172.20.1...

Hi, has somebody exact knowledgeabout running MS as NLB-Cluster in Multicast-Mode.We want to use it instead of Unicast-Mode, because the Cluster-Members are located in the same VLAN with other (non-cluster-Members) Servers.As I found there is a confi...

Hi,Has anybody ever seen a issue which an access port becomes unresponsive (meaning my PC gets a 169.xx.xx.xx IP address).  I created a spanning port and no data comes in or out of the port.  The shut / no shut has no effect.  The only way is to rebo...

How do I change the password for a user in the web interface of the Cisco Aironet 1200 AP?  On one system the username and password is memorized but I do not recall what that password is.  I would like to change it to have access from different syste...

Folks:These are very deep-dive questions, I hope someone can help.1.) Each class of traffic that you assign to a no-drop system class will get its own set of buffers, thereby eliminating contention of buffer resources from the drop system class. So, ...

I'd like to limit access to a particular server so that only two specific hosts can access this server.  The server is connected via a LAN switch port that is configured as an access port for the Server VLAN.  Initially I'd planned to apply an ACL to...

Hi all,Can any one know if its possible to have a VSS system with two diferentes sup-720 on each chassiOne chassi with VS-SUP-720-10G-3C  and the other with VS-SUP-720-10G-3CXLThanks