Login error on C3750

[kerryjcox]

Quick question and really maybe silly, but it's bugging me terribly.

When I SSH into my C3750-48PS switch, I get the weird "line 1" error immediately after connecting.       

[kcox@gimli ~]$ ssh kcox@10.xx.xx.xx

Password:

HAUPPAUGE-SW-1 line 1

HAUPPAUGE-SW-1#

Am happy to post a copy of the config here, but it really is not much. Just trying to determine why I would get an error saying "line 1".

Maybe this will help?

line con 0

line vty 0 4

exec-timeout 15 0

privilege level 15

password 7 122F56050B185F073F39777A636470

length 0

transport input ssh

line vty 5 15

exec-timeout 15 0

privilege level 15

password 7 122F56050B185F073F39777A636470

transport input ssh

!

ntp authentication-key 1 md5 060D0D12486B5C1103 7

ntp authenticate

ntp trusted-key 1

ntp clock-period 36028787

ntp source Vlan128

ntp server 198.60.22.240 prefer

ntp server 10.80.254.1 key 1 prefer

end

Any ideas or suggestions are appreciated.  The switch is running the following:

Switch Ports Model              SW Version            SW Image                

------ ----- -----              ----------            ----------              

*    1 52    WS-C3750-48P       12.2(55)SE5           C3750-IPSERVICESK9-M    

[Sebastian Helmer]

not sure but maybe two options..

1. what privilege leve has your user? maybe that is a problem beause u say in the line confrig every user will have 15.

2. IOS BUG I dind't check now a newer one is 12.2.58 SE8 I guess..

this are two quick shots from me right now ,).

[Rolf Fischer · Accepted solution]

No sure if I understand the question correctly.

HAUPPAUGE-SW-1 line 1

Do you want to get rid of this message?

This is not an error message, this is produced by the "service linenumber".

You can disable it simply by "no service linenumber" in global configuration mode.

http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_r1.html#wp1013607

HTH

Rolf

[kerryjcox]

Well.... crap.  That was too stinking easy.  I wish I had known about that.

I entered "no service linenumber" and the issue is gone.

Thanks much to all.

[Rolf Fischer]

You're welcome!

One more note: You shouldn't post Type-7 passwords, this encryption type is very weak:

http://www.ibeast.com/content/tools/CiscoPassword/

[kerryjcox]

Agreed and understood. This is for a temp staging switch. Once I get it all cleaned off, everyone will be moving off and the settings will be changed.

Thanks again for the help.