Looking for a CISCO model

[Alexandre Letard]

Hi all,

I'm looking for a model.

Looking to do NAT between two networks.
I must have a total of 6 gigabits interfaces.

I think I need a model 1900 series (router) with an extra card (4 ports at gigabit)
Can you advise me on a model?

A router is required to do NAT?

Thank you for helps

[Ganesh Hariharan]

Hi all,

I'm looking for a model.
Looking to do NAT between two networks.
I must have a total of 6 gigabits interfaces.
I think I need a model 1900 series (router) with an extra card (4 ports at gigabit)
Can you advise me on a model? 
A router is required to do NAT?

Thank you for helps

Hi,

Check out the below link on 1900 series routers with cisco ether switchh module

http://ciscosystems.com/en/US/docs/routers/access/1900/software/configuration/guideswitching_ps10538_TSD_Products_Configuration_Guide_Chapter.html#wp1076006

Hope to help !!

Ganesh.H

[paolo bevilacqua]

I think you are the end user ?

Please select first a reputable consultant, or certified Cisco partner to help you design and implement your network,.

Do not try to do it yourself, as that usually results in costly mistakes.