Low power consumption 10Gbps switch or router

[astarjones20]

Hi guys,

I need to setup a new little PoP in a DC which is giving me max 200W of power. In similar situations i usually put a couple of catalyst 3850 with stack config, for production traffic and a 3750 for management one. This build consumes around 295W

Do you have a suggestion on what can i put in this 5 rack unit space which consumes less than 200W? I can use MLAG instead of stackwise, what i need are at least 12 10Gbps ports on production switch and a couple of 1Gbps ports for management (routed or switched ports is not a constraint)

PSU have to be AC
Thanks in advance!

[Steven L]

This is not the correct forum for this question. probably should post it in the networking space.

[alptechexpert]

Considering your requirements, here are some suggestions:

Cisco Catalyst 9300 Series: These switches are designed for compact, low-power deployments. The Cisco Catalyst 9300-24UX model, for example, offers 24 10Gbps ports and 2 1Gbps ports, with a power consumption of around 140W

Juniper Networks EX2300 Series: The EX2300-24T model provides 24 10Gbps ports and 2 1Gbps ports, with a power consumption of approximately 120W

Arista Networks 7130 Series: The Arista 7130-24Q model offers 24 10Gbps ports and 2 1Gbps ports, with a power consumption of around 150W