ME 3600X is unsupported in Network Assistant?!

[Heiko.Bialozyt]

i got two ME 3600X and made primary setup on console.

now i would like to switch further configuration from network assistant or embedded device manager.

http is enabled

ip http secure-server  as well

on browser i see after logon a short page with some links to telnet, show interfaces and finaly a link to web-console. but this last link points to an invalid page.

maybe this is also the reason why network assistant shows this device always as unsupported.

My question: how i have to enable embedded device manager? and/or is this device supported by network assistant?

thanks for any help

here some informations:

System image file is "flash:/me360x-universalk9-mz.122-52.EY2/me360x-universalk9-mz.122-52.EY2.bin"

[radszuweit]

I have the same problem, but with:
me360x-universalk9-tar.155-3.S2.tar

unsupported device in CNA on device ME 3600x 24TS M

[Mark Malone]

There not supported devices on CNA ,whats supported is in the list in doc below

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html