cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
294
Views
0
Helpful
1
Replies

ME3400 switch configuration problem

nkbehuria
Level 1
Level 1

Baisc configuration done. All the links are UP. Connectivity showing, but hosts are not communicating with basic configuration. New Vlan created and switch port added but same problem.

1 Reply 1

ivillegas
Level 6
Level 6

Check the ip address assignment of the host. Check if they are in the same network. Check the following link to see if the configurations are done right http://www.cisco.com/en/US/docs/switches/metro/me3400/software/release/12.2_25_ex/configuration/guide/swint.html.

Review Cisco Networking for a $25 gift card