cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
256
Views
0
Helpful
3
Replies

memory; stack C3750

s4sandyad
Level 1
Level 1

HI frndz

 

we have 2-3750 in stack; need to upgrade ios  for that want to find out memory of each model. But normally we get ram size of device in sh version. but in stack of C - 3750 we are confused.. below is the output of 3750.

Please help me how to find out memory size from this??

even I want to know also how to find out flash size each model in stack 3750 devices.

 

X-3#sh ver

Cisco IOS Software, C3750 Software (C3750-ADVIPSERVICESK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 15:42 by antonino
Image text-base: 0x00003000, data-base: 0x01840000
 
ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(25r)SEE4, RELEASE SOFTWARE (fc1)
 
DR-Layer-3 uptime is 29 weeks, 3 days, 1 hour, 40 minutes
System returned to ROM by power-on
System restarted at 10:52:44 GMT Sat Jun 28 2014
System image file is "flash:/c3750-advipservicesk9-mz.122-44.SE2.bin"
 
 
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
 
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
 
If you require further assistance please contact us by sending email to
export@cisco.com.
 
cisco WS-C3750G-24TS-1U (PowerPC405) processor (revision E0) with 0K/12280K bytes of memory.
Processor board ID FOC1223Z3HS
Last reset from power-on
10 Virtual Ethernet interfaces
56 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
 
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 00:21:D7:EA:71:80
Motherboard assembly number     : 73-10219-07
Power supply part number        : 341-0098-02
Motherboard serial number       : FOC122312JZ
Power supply serial number      : AZS12200399
Model revision number           : E0
Motherboard revision number     : B0
Model number                    : WS-C3750G-24TS-S1U
System serial number            : FOC1223Z3HS
Top Assembly Part Number        : 800-26859-01
Top Assembly Revision Number    : C0
Version ID                      : V03
CLEI Code Number                : CNMWS00ARC
Hardware Board Revision Number  : 0x09
 
 
Switch Ports Model              SW Version            SW Image
------ ----- -----              ----------            ----------
     1 28    WS-C3750G-24TS-1U  12.2(44)SE2           C3750-ADVIPSERVICESK9-M
*    2 28    WS-C3750G-24TS-1U  12.2(44)SE2           C3750-ADVIPSERVICESK9-M
 
 
Switch 01
---------
Switch Uptime                   : 29 weeks, 3 days, 1 hour, 43 minutes
Base ethernet MAC Address       : 00:21:D7:49:34:80
Motherboard assembly number     : 73-10219-07
Power supply part number        : 341-0098-02
Motherboard serial number       : FOC122119TU
Power supply serial number      : DCA12199388
Model revision number           : E0
Motherboard revision number     : B0
Model number                    : WS-C3750G-24TS-S1U
System serial number            : FOC1221Y1T0
Top assembly part number        : 800-26859-01
Top assembly revision number    : C0
Version ID                      : V03
CLEI Code Number                : CNMWS00ARC
 

Configuration register is 0xF

 

S@NDY....

 

 

3 Replies 3

Mark Malone
VIP Alumni
VIP Alumni

Use show flash or dir to see the memory of each switch in a stack

 

Hi Mark,

Thanks...but

first I would like to know that how to find out DRAM of each switch in stack group.

Second thing show flash or show file system shows me flash info of each switch in stack...

Please guide about  DRAM..

 

S@ndy.

you have most likely hit a cosmetic bug there that is not showing you the overall dram  , it should not have an output of 0 , if you upgrade the IOS version it will fix this , that image is 6 years old as well and close to being in the deferred section on Cisco website

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card