cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1461
Views
0
Helpful
3
Replies

Module is not support on 4507R

shajahan yusuff
Level 1
Level 1

Dears,

i have WS-X4624-SFP-E chassis module. i tried to implement on 4507R LanSwitches. after implement that module is not support on 4507R Switches. could you plese help us.

1. how can to resolve.

2. Give other module with support 4507R with sfp chassis module.

Thank You,

Shajahan.

1 Accepted Solution

Accepted Solutions

Hi Shajahan,

E-Series line cards require E-Series chassis

These cards are classic line cards and should work in 4507R chasis.

WS-X4306-GB

Cisco IOS Software Release 12.1(8a)EW or later

WS-X4418-GB --

Cisco IOS Software Release 12.1(8a)EW or later


WS-X4448-GB-LX

Cisco IOS Software Release 12.1(8a)EW or later

WS-X4448-GB-SFP

Cisco IOS Software Release 12.2(20)EWA or later

WS-X4506-GB-T

Cisco IOS Software Release 12.2(20)EWA or later.

You can find these information below under individual line cards.

http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea.html

Also you can check the release notes for supported hardware for that particular IOS version.

Thanks

Subbiah

View solution in original post

3 Replies 3

subma
Cisco Employee
Cisco Employee

Hi Shajahan,


For WS-X4624-SFP-E


Here are the minimum requirements:

Chassis: 4500 E-series chassis

Supervsior: Supervisor Engine 6-E and Supervisor engine 6L-E

IOS: Cisco IOSR Software Release 12.2(44) SG or later


Here are some of Classic Gigabit Ethernet Fiber (GBIC or SFP) Line Cards


WS-X4306-GB
WS-X4418-GB
WS-X4448-GB-LX
WS-X4448-GB-SFP
WS-X4506-GB-T


please review the below datasheet for your reference.


http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea.html


Hope this helps.


Thanks

Subbiah



Dear subbiah,

Thank you. that mention module only support on 4507e chassis. i have for 4507 R Chassis. i went throu checked beow table.

Line Card

Number of Ports

Port Speed

Port Type

Wire Rate

Cisco Catalyst 4500 Series Min/Max Ports

4503-E

4506-E/
4507R-E/
4507R+E

4510R-E/
4510R+E

Classic Gigabit Ethernet Fiber (GBIC or SFP) Line Cards

WS-X4306-GB

6

1000BASE-X

GBIC

Yes

6/12

6/30

6/42

WS-X4418-GB

18

1000BASE-X

GBIC

2 ports full

16 ports
4-to-1
7

18/36

18/90

18/126

WS-X4448-GB-LX

48

1000BASE-LX

48 SFPs (included)

8-to-17

48/96

48/240

48/384

WS-X4448-GB-SFP

48

1000BASE-X

SFP

8-to-17

48/96

48/240

48/384

WS-X4506-GB-T

6 + 6

10/100/1000

1000BASE-X (SFP) RJ-45 PoE IEEE 802.3af
and Cisco prestandard

Yes

6/12

6/30

6/42

need supported model on 4507R Chassis. need for with SFP 24 ports. our OS version is 12.2(25)EWA4. is it need to upgrade OS to support for the above list.

Thank You,

Shajahan.

Hi Shajahan,

E-Series line cards require E-Series chassis

These cards are classic line cards and should work in 4507R chasis.

WS-X4306-GB

Cisco IOS Software Release 12.1(8a)EW or later

WS-X4418-GB --

Cisco IOS Software Release 12.1(8a)EW or later


WS-X4448-GB-LX

Cisco IOS Software Release 12.1(8a)EW or later

WS-X4448-GB-SFP

Cisco IOS Software Release 12.2(20)EWA or later

WS-X4506-GB-T

Cisco IOS Software Release 12.2(20)EWA or later.

You can find these information below under individual line cards.

http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea.html

Also you can check the release notes for supported hardware for that particular IOS version.

Thanks

Subbiah