Modulo GLC-T= en un Switch Catalyst WS-C3750G-12S-S

[maguzman06]

Buenos Dias,

Tengo problemas al usar un transceiver Cisco “GLC-T=”  en un Switch Catalyst WS-C3750G-12S-S:

Se conecta a un puerto libre de Fibra, el switch lo reconoce con “show inventory”, pero al conectar con patch cord de fibra a un equipo ni siquiera linkea

Pero cuando colocamos el transceiver a un Catalyst 2960 si funciona

Saludos.

[Reza Sharifi]

Hi,

Can't really read much Spanish but from what I can read you are saying GLC-T does not work in WS-C3750G-12S-S but it works in 2960.  If that is the correct translation than on the 3750 you need IOS 12.1.(14)EA1 or later version installed.

see this link

http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html

HTH