More than 50% bandwith to priority queue?

[rvv]

Hi experts!

It is possible to get more than 50% bandwith to egrees priority queue?

i mean when i use:

"srr-queue bandwith shape x 0 0 0"

x can't be < 2.

This means that i got only 1/2 of bandwith to priority queue.

But i have 3 different types of traffic.

Voice need 90%, and 2 other 5% and 5%.

If i use "priority queue out" does it mean that i'am not guarantee 10% of bandwith to other 2 queues?

How to achive my config, without use

"srr-queue bandwith share x y z w"?

[network.king]

Hi

You concept is correct . But having 90% as a priority traffic is just like a FIFO queuing and priority queuing is not going to help you.

Is that you are applying the srr-queue in a Ethernet or a Fast ethernet interface . How much is your priority traffic in terms of Mb

regards

vanesh k

[rvv]

i have 100Mb FastEthernet interface shaped to 50Mb with "srr-queue bandwith limit 50".

I need 1Mb and 5Mb for signaling traffic.

And i need to guarantee this.

And all other bandwith for voice.

And Voice is high priority for jiteer, packet loss ... etc.