Mpls configuration guide needed

[Mohamed Kabeer S]

Hi all,

I am completed my CCNP but I want to know some configuration guide for MPLS.can anyone help How MPLS work and How to configure MPLS point-to-point and point-to-multipoint in which scenario we could implement this.

[InayathUlla Sharieff]

Hi Mohammed,

https://docs.google.com/viewer?a=v&q=cache:WkkNjHduImgJ:www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r2.0/mpls/configuration/guide/gcbook.pdf+&hl=en&gl=in&pid=bl&srcid=ADGEESiuQiRd5GsJlhbJY3S5JsYzyDE6EXLdWpWei0SgI8W8HVLmBNysHF78Y5qzTfdW4Eq3bUQT-4s64CgTXZ...

HTH

Regards

Inayath

*Plz rate all usefull posts.

[Bilal Nawaz]

To enable mpls is pretty much 1 command.
But you do need routing reachability within your core.

'Ip mpls' on all mpls active interfaces, the clever things happen with when you have customers and are providing services over mpls structure e.g. Mpls VPN.

Mpls FAQ for beginners: http://www.cisco.com/en/US/tech/tk436/tk428/technologies_q_and_a_item09186a00800949e5.shtml

MPLS presentations: http://www.cisco.com/en/US/products/ps6557/prod_presentation_list.html

Mpls config examples: http://www.cisco.com/en/US/tech/tk436/tk428/tech_configuration_examples_list.html

Hope this helps

Sent from Cisco Technical Support iPhone App