10-29-2013 11:08 PM - edited 03-07-2019 04:19 PM
Hi experts
we have a 4600 series switch and i am trying to configure multicast inside a vrf .
core(config)#ip multicast-routing ?
as i see we dont have support for vrf multicast right now .
ie ip multicast-routing vrf VPNA command is not available
CORE#show ver Cisco Internetwork Operating System Software IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I5S-M),
Version 12.2(20)EWA4, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport
System image file is "bootflash:cat4000-i5s-mz.122-20.EWA4.bin ..
is the support for multicast inside a vrf available for 4506 ? if yes what version should i upgrade to ??
10-30-2013 12:47 PM
Gents i am trying to find ip multicast-routing vrf support in command reference of 4500 series images , but unable to find one
10-31-2013 12:47 AM
This feature does not seem to be supported on 4500. I could not find it for 4500 in feature navigator and not in the configuration guide either. I saw that it was supported for 3750, 6500, 7600 and so on.
Daniel Dib
CCIE #37149
10-31-2013 06:34 PM
Hello people,
On the version that you are running at this moment, version 12.2(20)EWA4, multicast routing VRF is not supported, however, looking on the configuration guide for the 4500 I found the command enable after the version 12.2(50)SG:
(Log in is needed):
Switch(config-vrf)# ip multicast-routing vrf
(Optional) Enables global multicast routing for VRF table.
Check if the version 12.2(50)SG is compatible with the supervisor engine that you have on the 4506 prior to upgrade to the IOS version
11-04-2013 10:50 PM
hi all
i think their is documentation error.
i have upgraded to
BB1#show ver Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M), Version 12.2(54)SG1,
RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Thu 27-Jan-11 11:39 by prod_rel_team Image text-base: 0x10000000, data-base: 0x123FB194
ROM: 12.2(31r)SG2 Dagobah Revision 226, Swamp Revision 34
BB1 uptime is 13 hours, 40 minutes System returned to ROM by power-on System restarted
at 06:15:00 EST Mon Nov 4 2013 System image file is "bootflash:cat4500-entservicesk9-mz.122-54.SG1.bin"
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance
please contact us by sending email to export@cisco.com.
cisco WS-C4506 (MPC8245) processor (revision 4) with 524288K bytes of memory
. Processor board ID FOX11090SLF MPC8245 CPU at 400Mhz, Supervisor
V Last reset from Abort 147 Virtual Ethernet interfaces 44 Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2102
and no support for vrf ...
BB1#conf t Enter configuration commands, one per line. End with CNTL/Z
11-06-2013 07:10 AM
Hi Ehtesham,
You need supervisor 6-E for this to work.
Regards
Ahmed Alrawi
11-09-2013 10:53 AM
Dear Ahmed, you are spot on ! this is working on 6-E , Can you give me the link please ? from where you find the info..
11-09-2013 03:00 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide