We have a multicast routing across VLANs for group 226.0.20.112 that worked for a day, but it suddenly stopped. I can't find information on what I see, but can anyone confirm this is a problem and how I might resolve it? You will notice "1d00h/stopped" below.
VVRH-4507#sh ip mroute 226.0.20.112
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C - Connected,
L - Local, P - Pruned, R - RP-bit set, F - Register flag,
T - SPT-bit set, J - Join SPT, M - MSDP created entry,
X - Proxy Join Timer Running, A - Candidate for MSDP Advertisement,
U - URD, I - Received Source Specific Host Report,
Z - Multicast Tunnel, z - MDT-data group sender,
Y - Joined MDT-data group, y - Sending to MDT-data group
V - RD & Vector, v - Vector
Outgoing interface flags: H - Hardware switched, A - Assert winner
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 226.0.20.112), 1d00h/stopped, RP 10.1.99.254, flags: SJC
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Vlan1, Forward/Sparse-Dense, 00:53:07/00:02:10, H
Vlan4, Forward/Sparse-Dense, 02:37:36/00:02:03, H
Vlan9, Forward/Sparse-Dense, 1d00h/00:02:06, H
(10.1.9.12, 226.0.20.112), 1d00h/00:02:59, flags: T
Incoming interface: Vlan9, RPF nbr 0.0.0.0
Outgoing interface list:
Vlan1, Forward/Sparse-Dense, 00:53:07/00:02:10, H
Vlan4, Forward/Sparse-Dense, 02:37:36/00:02:03, H
Here is the basic chunk of configuration:
interface Loopback0
ip address 10.1.99.254 255.255.255.0
ip pim sparse-dense-mode
...
interface Vlan1
ip address 192.6.127.219 255.255.255.0
ip broadcast-address 192.6.127.255
no ip redirects
no ip proxy-arp
ip pim sparse-dense-mode
!
interface Vlan2
ip address 10.1.2.1 255.255.255.0
no ip redirects
no ip proxy-arp
ip pim sparse-dense-mode
...
other vlan interfaces
...
access-list 10 permit 224.0.0.0 15.255.255.255
access-list 20 deny 224.0.1.39
access-list 20 deny 224.0.1.40
access-list 20 permit 224.0.0.0 15.255.255.255
...
ip pim rp-address 10.1.99.254 20
ip pim send-rp-announce Loopback0 scope 32 group-list 10
ip pim send-rp-discovery Loopback0 scope 32
Thanks for your help.
