N ports to 1 port and 1 port to n ports

[Toug31]

Hi,

I need to switch traffic on a 2960 cisco switch.

Here is want I want:

Traffic received on ports 1 to 10 being forwarded only to port 11.

Traffic received on port 11 being forwarded to ports 1 to 10.

That means that traffic received on port 1 has to not being forwarded to ports 2 to 10.

Maybe using vlan forwarding? but frames can't be modified.

Thanks a lot to this community.

[marce1000]

- Switches don't work that way; they like forwarding ; simply put the ports in the same 'forwarding domain' into separate VLAN;'s.

M.

[Toug31]

I know that I request specific switching rules. I don't know how to do what your speaking about. Will search forwarding domain in google...

[Joseph W. Doherty]

If the 2960 support PVLANs, that might meet your requirements.

[Toug31]

Does the ports have to be in trunk mode?

[Joseph W. Doherty]

For PVLAN ports? I recall the edge/host ports do not. Don't recall for the "gateway/hub" port, but likely not.