08-27-2019 07:27 AM
Hi all,
I would like to know if the NCS520 can the interfaces be configured for layer 2?
thanks.
08-27-2019 08:43 AM
08-27-2019 09:50 AM - edited 08-27-2019 10:31 AM
Hello,
This is the configuration I need.
interface TenGigabitEthernetY/X
description VM
switchport access vlan 3223
switchport mode access
switchport port-security maximum 500
switchport port-security violation restrict
switchport port-security aging time 4
switchport port-security aging type inactivity
switchport port-security
mtu 9198
load-interval 30
storm-control broadcast include multicast
storm-control broadcast level 0.05
no cdp enable
spanning-tree portfast edge
spanning-tree bpdufilter enable
service-policy input POL_30_IN
service-policy output POL_300_OUT
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide