01-23-2013 06:09 AM - edited 03-07-2019 11:15 AM
We have 3 Cat 4500 switches on three floors teh 3rd floor switch connects to the 2nd and 4th floor switches ,but we are receiving an alert from monitoring tool that " Interface(314) Backup-1Gb-Ring is Down at least 2 min on Switch: SOM500-4510-3FL
the following output from "sh int status module 1 " shows the int 1/3 and 1/4 are 'inactive'local IT guy said If the status is inactive,the ports cannot be used and might lost the capability when he added 48-port blade into the 10th slot.Can someone help try to identify the issue here.
2nd Floor
Port Name Status Vlan Duplex Speed Type
Te1/1 SOM500-Core1 connected trunk full 10G 10GBase-LRM
Te1/2 SOM500-Core1 connected trunk full 10G 10GBase-LRM
Gi1/3 Backup-1Gb-Ring notconnect 1 full 1000 1000BaseSX
Gi1/4 Backup-1Gb-Ring connected trunk full 1000 1000BaseSX
3rd Floor
Port Name Status Vlan Duplex Speed Type
Te1/1 SOM500-Core1 connected trunk full 10G 10GBase-LRM
Te1/2 SOM500-Core1 connected trunk full 10G 10GBase-LRM
Gi1/3 Backup-1Gb-Ring inactive 1 full 1000 1000BaseSX
Gi1/4 Backup-1Gb-Ring inactive 1 full 1000 1000BaseSX
Gi1/5 inactive 1 full 1000 No Gbic
Gi1/6 inactive 1 full 1000 No Gbic
4th Floor
Port Name Status Vlan Duplex Speed Type
Te1/1 SOM500-Core1 connected trunk full 10G 10GBase-LRM
Te1/2 SOM500-Core1 connected trunk full 10G 10GBase-LRM
Gi1/3 Backup-1Gb-Ring inactive 1 full 1000 1000BaseSX
Gi1/4 Backup-1Gb-Ring inactive 1 full 1000 1000BaseSX
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASEK9-M), Version 12.2(31)SGA10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 12-Jun-09 15:33 by karnagar
Image text-base: 0x10000000, data-base: 0x115D7330
ROM: 12.2(31r)SGA3
Pod Revision 16, Force Revision 34, Tie Revision 32
SOM500-4510-4FL uptime is 1 year, 38 weeks, 1 day, 10 hours, 26 minutes
Uptime for this control processor is 1 year, 38 weeks, 1 day, 9 hours, 37 minutes
System returned to ROM by power-on
System restarted at 23:29:54 EDT Sun May 1 2011
System image file is "slot0:cat4500-ipbasek9-mz.122-31.SGA10.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C4510R (MPC8540) processor (revision 11) with 524288K bytes of memory.
Processor board ID FOX091404HA
MPC8540 CPU at 800Mhz, Supervisor V-10GE
Last reset from PowerUp
2 Virtual Ethernet interfaces
340 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2102
01-23-2013 11:14 AM
would you be able to post the port configs of g1/3 and g1/4?
the only time I've ever seen inactive is when a port was set to a vlan that didn't exist
on the switch, but vlan 1 can't be removed, so.....
chris
01-24-2013 04:02 AM
Hi Chris,
find the detais below
interface GigabitEthernet1/3
description Backup-1Gb-Ring
switchport trunk encapsulation dot1q
switchport trunk native vlan 500
switchport mode trunk
ip arp inspection trust
ip dhcp snooping trust
end
interface GigabitEthernet1/4
description Backup-1Gb-Ring
switchport trunk encapsulation dot1q
switchport trunk native vlan 500
switchport mode trunk
ip arp inspection trust
ip dhcp snooping trust
end
01-24-2013 06:05 AM
ok, thanks.
doesn't look like anything is out of the ordinary. So getting back to my last post, does vlan 500 exist on the switch?
Also do a sho int trunk. I don't see any vlan allowed/removed statements so I assume the default of 1-4094 allowed on
the trunk. If a sho int trunk shows no vlans allowed on the trunk, then I think that's your problem.
also, getting back to my last post, disregard about the vlan 1 statement. My error.
chris
01-24-2013 10:13 AM
Chris
Thanks for your reply
include out from sh int tru
SOM500-4510-2FL#sh int trunk module 1
Port Mode Encapsulation Status Native vlan
Te1/1 on 802.1q trunk-inbndl 500
(Po2)
Te1/2 on 802.1q trunk-inbndl 500
(Po2)
Gi1/3 on 802.1q other 500
Gi1/4 on 802.1q trunking 500
Gi1/5 auto negotiate other 1
Gi1/6 on 802.1q trunking 500
Port Vlans allowed on trunk
Te1/1 1-4094
Te1/2 1-4094
Gi1/3 none
Gi1/4 1-4094
Gi1/5 none
Gi1/6 1-4094
Port Vlans allowed and active in management domain
Te1/1 1,4,10-11,15,20-22,25-27,30-35,40-41,45,57-58,60-62,64-70,72-77,100-102,111-114,128,161,180,182,184,200-202,212,254-255,301-302,401-402,500
Te1/2 1,4,10-11,15,20-22,25-27,30-35,40-41,45,57-58,60-62,64-70,72-77,100-102,111-114,128,161,180,182,184,200-202,212,254-255,301-302,401-402,500
Gi1/3 none
Gi1/4 1,4,10-11,15,20-22,25-27,30-35,40-41,45,57-58,60-62,64-70,72-77,100-102,111-114,128,161,180,182,184,200-202,212,254-255,301-302,401-402,500
Gi1/5 none
Gi1/6 1,4,10-11,15,20-22,25-27,30-35,40-41,45,57-58,60-62,64-70,72-77,100-102,111-114,128,161,180,182,184,200-202,212,254-255,301-302,401-402,500
Port Vlans in spanning tree forwarding state and not pruned
Te1/1 1,4,10-11,15,20-22,25-27,30-35,40-41,45,57-58,60-62,64-70,72-77,100-102,111-114,128,161,180,182,184,200-202,212,254-255,301-302,401-402,500
Te1/2 1,4,10-11,15,20-22,25-27,30-35,40-41,45,57-58,60-62,64-70,72-77,100-102,111-114,128,161,180,182,184,200-202,212,254-255,301-302,401-402,500
Port Vlans in spanning tree forwarding state and not pruned
Gi1/3 none
Gi1/4 1,4,10-11,15,20-22,25-27,30-35,40-41,45,57-58,60-62,64-70,72-77,100-102,111-114,128,161,180,182,184,200-202,212,254-255,301-302,401-402,500
Gi1/5 none
Gi1/6 1,4,10-11,15,20-22,25-27,30-35,40-41,45,57-58,60-62,64-70,72-77,100-102,111-114,128,161,180,182,184,200-202,212,254-255,301-302,401-402,500
01-24-2013 12:03 PM
Gopineni,
ok, thanks. What I am not sure of is whether or not it shows no vlans allowed on trunk because it is inactive,
or if it is inactive because there are no vlans allowed on the trunk, I believe it is inactive because no vlans are allowed
on the trunk.
Are these links in use or connected to anything? If not, I would reset them to default config and shut them down
(default interface g1/3, default interface g1/5).
If they should be in use, and that's what you are troubleshooting, then
just adding vlans allowed should bring it back into service. Going by the descriptions, this might not be a good test
scenario, but you can always add a vlan that is not on the other trunks. For instance, add vlan 80 as an allowed vlan and
see if it comes out of inactive state.
01-24-2013 12:32 PM
Ok Chris will test and post the results.
Thank You.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide