05-04-2017 02:01 AM - edited 03-08-2019 10:25 AM
Hi Experts,
Hope you all are doing well!!!
Recently am facing some issues with ASR 1002 and GLC-TE Copper Base-T Module.
Please see below details:
1. Router Model ASR 1002 and Running IOS asr1000rp1-adventerprisek9.03.04.02.S.151-3.S2.bin
2. Running Copper Base-T Module SFP-GE-T
Now I am trying to use GLC-TE module but port is not UP.
How can I solve this problem!!
Thanks and Regards
Mohammad Arif Sarker
Solved! Go to Solution.
05-04-2017 03:45 AM
Hi this matrix says both are supported , you just need the higher release so the TE works too
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html#_Toc476298591
05-04-2017 02:19 AM
did you try turn off negotiation and hard set the port ?
what are you connected to ?
I have these running in our asr 1001x routers there definitely supported
#sh inve | i GE
NAME: "SPA subslot 0/0", DESCR: "Built-in GE SPA with 2 port 10G and 6 port 1G Interfaces"
PID: BUILT-IN-2T+6X1GE , VID: , SN:
NAME: "subslot 0/0 transceiver 3", DESCR: "GE T"
NAME: "subslot 0/0 transceiver 4", DESCR: "GE T"
NAME: "subslot 0/0 transceiver 5", DESCR: "GE T"
NAME: "subslot 0/0 transceiver 7", DESCR: "GE T"
#sh ver | i asr
System image file is "bootflash:asr1001x-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bi"
#sh run int g0/0/3
Building configuration...
Current configuration : 476 bytes
!
interface GigabitEthernet0/0/3
description
bandwidth 150000
no ip address
speed 1000
no negotiation auto
05-04-2017 03:18 AM
Thank you for reply.
I think your IOS is updated then mine.
From Compatibility Matrix I have found that, GLC-TE I need to update my IOS to 3.15.0S.
But If I update the IOS is there will be any problem with Previous SFP-GE-T
05-04-2017 03:45 AM
Hi this matrix says both are supported , you just need the higher release so the TE works too
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html#_Toc476298591
05-04-2017 04:53 AM
Yes!!
Can help me to have the IOS Bin File??
05-04-2017 04:56 AM
No sorry its against Forum rules you cannot provide software as its registered by contract paid for so its basically stealing copy right license off Cisco that's the way its looked at , you need to have a support contract in place to be able to download it from their website
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide